Testing Equipment Calibration

Bleeding cylinder

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-26 for the dimensional requirements as specified in :
HKHA Specification (2008 edition) Section PIL 1.T320.5 Cl. 2a, or
HKHA Specification (2012 edition), Section PIL 1.T320.6 Cl. 2a, or
General Specification for Civil Engineering Works (2006 Edition) Section 17.60 Cl. 2

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-186 for the time of efflux as specified in ASTM C939-97 Cl. 8, or ASTM C939-02 Cl. 8, or ASTM C939-10 Cl. 9

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-183 for the dimensional and weight requirements as specified in : CS1: 1990 Vol. 1 (AMD 1102) App. A9, or CS1: 2010 Vol. 1 App. A10

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-184 for the dimensional requirements as specified in CS1: 1990 Vol. 1 (AMD 1102) App. A21 (excluding surface texture determination), or CS1: 2010 Vol. 1 App. A25
On-site verification in accordance with in-house method CAL-184 for the dimensional requirements as specified in CS1: 1990 Vol. 1 (AMD 1102) App. A21 (excluding surface texture determination), or CS1: 2010 Vol. 1 App. A25

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-265 for the linear dimensional requirements (excluding volume requirement) as specified in BS EN 445: 2007 Cl. 4.3.1.2(a)

HOKLAS Accredited Tests

Calibration in accordance with in-house method CAL-196 for the accuracy as specified in : BS 1881: Part 204: 1988, Cl. 6.4 (Method C) over the following range :

HOKLAS Accredited Tests

On-site determination of efficiency of circulation and temperature distribution in accordance with in-house method CAL-174

HOKLAS Accredited Tests

On-site verification in accordance with in-house method CAL-5 for the temperature variation and evaporation rate
On-site measurement of the temperature of centre point in accordance with in-house method CAL-3

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-94 for the dimensional and weight requirements as specified in : CS1: 1990 Vol. 1 (AMD 1206) App. E1, or BS 1881: Part 105: 1984 Cl. 3.1, or BS EN 12350-5: 2000 Cl. 4.1, or BS EN 12350-5: 2009 Cl. 4.1, or CS1: 2010 Vol. 1 App. A15.1

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-244 for the dimensional and perpendicularity requirements as specified in CS1: 2010 Vol. 1 App. A15.5

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-94 for the dimensional requirements as specified in : CS1: 1990 Vol. 1 (AMD 1206) App. E2, or BS 1881: Part 105: 1984 Cl. 3.2, or BS EN 12350-5: 2000 Cl. 4.2, or BS EN 12350-5: 2009 Cl. 4.2, or CS1: 2010 Vol. 1 App. A15.2

HOKLAS Accredited Tests

Determination of rebound value in accordance with in-house method CAL-220 using anvil complying with BS EN 12504-2: 2001 Cl. 4.2 or BS EN 12504-2:2012 Cl. 4.2
Determination of the friction of rider in accordance with in-house method CAL-220

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-181 for the dimensional requirements as specified in : CS1: 1990 Vol. 1 (AMD 1102) App. A4, or CS1: 2010 Vol. 1 App. A5

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-245 for the dimensional and flatness requirements as specified in CS1: 2010 Vol. 1 App. A16 :

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-94 for the dimensional requirements as specified in : CS1: 1990 Vol. 1 (AMD 1206) App. E3, or BS EN 12350-5: 2000 Cl. 4.3, or BS EN 12350-5: 2009 Cl. 4.3, or CS1: 2010 Vol. 1 App. A15.3

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-182 for the dimensional requirements as specified in : CS1: 1990 Vol. 1 (AMD 1102) App. A5, or CS1: 2010 Vol. 1 App. A6

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-264 for the dimensional requirements as specified in : BS EN 445: 2007 Cl. 4.5.2

HOKLAS Accredited Tests

Verification in accordance with in-house method CAL-94 for the dimensional requirements as specified in BS 1881: Part 105: 1984 Cl. 3.3 (AMD 6087)

Forms and Documentation

Request a Quote Test Request Form HOKLAS Accreditation OSHE | Quality Management

Latest Works

  • Image

    GI Logging

  • Image

    Koden Test

  • Image

    Oedometer Test

  • Image

    Welding Inspection

© 2024 GCE, Ltd. All rights reserved.